AURASPERSE W-7114 Black Oxide
AURASPERSE W-7114 Black Oxide
AURASPERSE® ll W-7114 Black Oxide is an aqueous dispersion of Pigment Black 11. It can be used for water-based and emulsion systems with pH values ranging from 7 to 11, and can be intermixed. AURASPERSE ll pigment dispersions are free of binding agents, APEOs, and solvents.
BASF AURASPERSE and AURASPERSE ll pigment dispersions provide the full benefits of high-quality organic and inorganic colorants in water-based and/or emulsion systems. With their high pigment content, they are ideally suited for in-plant tinting operations.
This product is used in the following applications:
- Consumer paint
- Rubber latex
- Non-woven fabrics
- Lumber marking
- Cement
- Paper coatings
For more information on the AURASPERSE colorants range, check out the Colorants Range Card
Features & Benefits
- High performance characteristics – good flowability, pumpability and stability against sedimentation
- Can be intermixed in both water-based and emulsion systems
- Strong batch-to-batch consistency with tint strength tolerance of +/- 3% versus master standards
- Eco-based chemistry with AURASPERSE ll – free of APEOs, binding agents and solvents
- Supports a variety of architectural and industrial coatings applications
Properties
Typical Properties | Pigment | Total |
Solids by Weight | 47% | 0% |
Solids by Volume | 16% | 0% |
Viscosity | 85 – 100 KU | |
pH | 8.0 – 9.0 | |
Density at 20°C | 1.60 g/cm3 | |
Boiling Point | > 100°C | |
Weight per Gallon | 13.3 lbs/gal | |
Hegman Grind | 6 min. |