CoatOSil T-Cure
CoatOSil T-Cure
CoatOSil® T-Cure silane oligomer may be useful in the development of coating formulations where reactivity with a mercapto silane is desired. This patented oligomer is low in odour compared to standard mercapto silanes and can display a trio of reactive chemistries. In addition to thiol groups, silanol and diols are generated upon the hydrolysis of the silane.
The potential applications for CoatOSil T-Cure include:
- Coatings for industrial maintenance applications including storage tanks, bridges and exterior steel structures
- Coatings requiring curing at elevated temperatures (heat cured formulations), such as coatings for automotive, appliance or coil applications
- Epoxy primers for metals and flooring
- Room temperature cure coatings for applications such as aerospace and automotive re-finishing
To learn more about Momentive Silanes for Coating Applications, check out the Momentive Paint and Coatings Brochure!
Features & Benefits
- Less than 1%wt releasable ethanol
- Low odour
- Low viscosity
- Behaves as reactive diluent within a coating formulation
- Can be used in virtually all coatings chemistries where mercapto groups can react: Isocyanates, Epoxies, Acrylates
Benefits of CoatOSil T-Sure silane oligomer in NCO coating formulations:
- Higher initial surface hardness of coatings
- QUV-B gloss and color change was equal to the control. QUV-A results were similar when tested.
- NSST corrosion resistance appears to have been better than the control
- Greater open time during cure, which may potentially lead to a longer pot-life after mixing
- An excellent candidate to consider for both castable and RIM urethane and urea applications
Performance Data
For more performance data, check out the CoatOSil T-Cure Marketing Bulletin
Properties
Property | Value |
Density (gm/cm3) at 25°C | 1.105 |
Viscosity at 25°C (cPs) | ~ 400 |
Refractive Index at 25°C | ~ 1.4745 |
Surface Tension at 25°C (dyne/cm) | ~ 34.65 |