JONCRYL® 633 is a hard acrylic emulsion that enables the formulation of water-based inks that look cleaner and brighter on brown kraft, mottled white and other non-coated paper and paperboard substrates. JONCRYL 633 allows for better quality graphics on press, multiple colors with minimal trapping, and high ink transfer, as well as good water and rub resistance. JONCRYL 633 can be used to reduce the amount of Titanium Dioxide required in white inks due to its high opacity.

With its excellent high opacity, good resolubility, water and rub resistance, JONCRYL 633 is versatile to use in flexographic and gravure high strength inks on a variety of paper substrates.

Applications for JONCRYL 633

This styrene acrylic emulsion can be used to manufacture inks for corrugated board and kraft bags. Inks formulated with JONCRYL 633 enable bright, clean colors on off-white substrates. It can also be used as a partial substitute for Titanium Dioxide in ink formulations for paper and board substrates.

JONCRYL 633 is recommended for applications such as: printing inks for flexographic or gravure applications

Features & Benefits

• High opacity and good resolubility
• Good water and rub resistance
• Low VOC/glycol ether free/HAP solvent free
• Compatible with most printing and packaging polymers and additives
• No costs for solvent abatement or explosion proof systems
• Very low VOC alternative to ink vehicles requiring slow evaporating, volatile amines and co-solvents to attain pH stability
• Addresses today’s environmental challenges while enhancing performance and cost efficiency

See what the Azelis Chemists have to say about JONCRYL 633 – Use an Opaque Polymer to reduce TiO2 in Ink Formulations

For more information on JONCRYL 633, check out the Product Brochure!

Performance Data

Figure 1: Emulsion Performance Comparison

Figure 2: JONCYRL 633 Opaque Emulsion vs. Standard Opaque Emulsion

Properties

*These typical values should not be interpreted as specifications.