Rhodoline OTE-600

Rhodoline OTE-600

Rhodoline OTE-600

Ready to BuyTalk to an Expert

Rhodoline® OTE-600 is a unique VOC and APE-free liquid additive that is developed to help open time and wet edge performance in waterborne coatings. It utilizes a “patented hydrophobe technology” that slows latex particle contact during the drying process thereby, delaying initial coalescence.

This product is a sustainable solution that enables formulations of high performing low to VOC-free coatings. It is an excellent alternative to glycols and has longer workability, improved flow, and leveling. It also maintains and improves other paint properties such as improved “brush clogging”. With this additive, sustainable coatings can be designed for Green Seal (GS-11) or EU Ecolabel compliance.

Rhodoline OTE-600 is typically added in the letdown stage of the formulation. It is preferred to add as close as possible to the addition of the binder and then mixed thoroughly. It can also be used in the grind stage of the formulation to replace the wetting agent.

For typical usage levels, it is recommended to start with a 1% addition based on the total formula weight. It is possible to reduce/eliminate surface active agents and solvents such as glycols (intended to extend open time).

 

Features & Benefits

  • Longer workability and better applicability
  • APE-free
  • Near 0 VOC and very low SVOC
  • Improved film appearance
  • Improves indoor air quality
  • Maintain and/or improve other paint performance properties – less “brush clogging”
  • Target ecofriendly market
  • Patented technology &  Ecolabel compliant
  • Electrosteric stabilization
  • Low odor
  • Versatile utility of binders: Acrylic, Styrene/Acrylic, Vinyl Acetate, VEOVA
  • Alternative to glycols
  • Freeze-thaw improvement (depending upon formulation)

Performance Data

Open Time Evaluation

Rhodoline OTE-600 Open Time Evaluation

Film Appearance & Workable Time

Paints were tinted with colorant of choice. The paint was applied by a roller on a sealed cement substrate. After 10 minutes, the area was re-rolled. The optimized formulation has much more uniform appearance and coverage. Workable time of optimized formulation is longer than the original one.

Properties

PropertyValue
AppearanceClear to hazy amber/yellow liquid
Specific Gravity, at 25°C1.026 - 1.226
Solids, %73.0 - 77.0
pH (5% aq. solution)4.0 - 7.0
Viscosity, at 25°C, LV4, 60 RPM, cPs5,000 max.

Title

Please Select Your Regional Location

CASE_site_map4
This website uses cookies to ensure you get the best experience on our website. By clicking anywhere on our website you will accept our cookie policy. Accept Cookies