PLURACOL 2010
PLURACOL 2010
PLURACOL 2010 is formed by adding propylene oxide to a propylene glycol nucleus. PLURACOL 2010 is used in the preparation of polyurethane foams, adhesives, coatings, elastomers and sealants.
PLURACOL® is a diverse range of polyether polyols including conventional and graft polyols. The PLURACOL graft series are polyether products containing dispersed particles of co-polymerized styrene and acrylonitrile, or SAN particles. These products offer property improvements for certain applications such as flexible foam and urethane elastomers.
Performance Data
Appearance | clear liquid |
Hydroxyl number, mg KOH/g | 53.4 – 58.8 |
Water wt.% maximum | 0.04 |
Acid number, maximum | 0.015 – 0.025 |
Na & K, ppm maximum | 5 |
Color, APHA maximum | 30 |
Nominal functionality | 2 |
Nominal molecular weight | 2000 |
Density, lbs/gal @ 77°F | 8.36 |
Density, lbs/gal @ 100°F | 8.27 |
Density, lbs/gal @ 140°F | 8.15 |
Viscosity, cps @ 77°F | 250 |
Viscosity, cps @ 100°F | 180 |
Viscosity, cps @ 140°F | 68 |
Specific heat, BTU/lb °F | 0.5 |
Thermal conductivity, BTU/hr ft2 °F/in | 0.087 |