Cure and Seal Coating for Concrete Surfaces
This Cure and Seal Coating for Concrete Surfaces formulation features ACRONAL® 4040 which is a styrene-acrylic copolymer designed for water-based concrete cure and seal coatings to deliver both benefits of a curing agent and sealer in a single coating application.
Our Chemists tested this formula in our labs!
See our Chemist Collaboration – Shift your Expectations, not Color – Better Cure & Seal
BASF reference CS-1
Formula Properties
| Typical Properties | Value |
| Polymer Solids Content (Wt solids %) | 33 |
| % Coalescent on Dry Polymer | 15 |
| Viscosity (cps) | 20 |
| pH | 7.3 |
| TVOC’s (g/L, calculated) | ca. 140 |
Performance
Concrete coated with Cure and Seal CS-1 formulation based on ACRONAL 4040 performed comparable to Cure and Seal CS-1 formulation based on competitive latex. Water Loss Test was performed according to ASTM C 156
DISCLAIMER - The information contained herein is given in good faith, based on our current knowledge and without any representation and warranty, express or implied, on its quality, accuracy, and completeness. Although it is Azelis’ practice to assist our customers with technical advice and to identify and recommend appropriate solutions for any particular application issue, such assistance, advice, and recommendation is provided without guarantee and warranty, express or implied, in relation to the suitability for use, merchantability or performance of a product, formulation or its individual ingredients for any particular application, and Azelis cannot accept any liability for any possible damages, losses or claims in this respect. Considering that Azelis can neither anticipate nor control the different conditions or circumstances under which the product is being used or commercialized, each user should conduct the necessary research and testing to ensure that a product, formulation, or its individual ingredients are fit for purpose and their intended application and verify whether their use or application does not infringe any third party (intellectual property) rights. Users are responsible for ensuring compliance with applicable laws and regulations when handling any product, formulation, or individual ingredient and are expected to familiarize themselves with the Safety Data Sheet for safety, health, and environmental information, including any instructions related to wearing protective equipment. Where required, users should obtain the necessary certifications, permits, and authorizations prior to using or commercializing any product, formulation, or individual ingredient. Please make certain that you are at all times in possession of the latest version of the written technical specification for each product, formulation, or individual ingredient, which can be requested in writing by mailing to your local representative].
