Polyurethane Clearcoat – Improved Adhesion – Low Odor
When formulated into an isocyanate and acrylate based polyurethane coating formulation, CoatOSil T-Cure silane can improve a number of physical properties. In the following formula, CoatOsil T-Cure Silane was added at 3% by weight in Part A.
You may also be interested in this Chemist Collaboration: Adhesion takes on the Corrosion Battle
Part A.1
Part A.2 Gel Paste Intermediate
Part A.3
Part A.4 Catalyst Intermediate
Part A.5
Part B Isocyanate Solution
Performance
Exhibited benefits of CoatOSil T-Cure silane oligomer in NCO coating formulations:
– Higher initial surface hardness of coatings
– NSST corrosion resistance improvement
– Greater open time during cure, which may potentially lead to a longer pot-life after mixing
– An excellent candidate to consider for both castable and RIM urethane and urea applications
DISCLAIMER - The information contained herein is given in good faith, based on our current knowledge and without any representation and warranty, express or implied, on its quality, accuracy, and completeness. Although it is Azelis’ practice to assist our customers with technical advice and to identify and recommend appropriate solutions for any particular application issue, such assistance, advice, and recommendation is provided without guarantee and warranty, express or implied, in relation to the suitability for use, merchantability or performance of a product, formulation or its individual ingredients for any particular application, and Azelis cannot accept any liability for any possible damages, losses or claims in this respect. Considering that Azelis can neither anticipate nor control the different conditions or circumstances under which the product is being used or commercialized, each user should conduct the necessary research and testing to ensure that a product, formulation, or its individual ingredients are fit for purpose and their intended application and verify whether their use or application does not infringe any third party (intellectual property) rights. Users are responsible for ensuring compliance with applicable laws and regulations when handling any product, formulation, or individual ingredient and are expected to familiarize themselves with the Safety Data Sheet for safety, health, and environmental information, including any instructions related to wearing protective equipment. Where required, users should obtain the necessary certifications, permits, and authorizations prior to using or commercializing any product, formulation, or individual ingredient. Please make certain that you are at all times in possession of the latest version of the written technical specification for each product, formulation, or individual ingredient, which can be requested in writing by mailing to your local representative].